Home > Motorsport > Rally Wheels > Conversion Studs
Part Number: SS24Spline Diameter No SplineThread Size M12 x 1.25Stud Length 80mm
Grayston conversion wheel studs, here with an M12 x 1.25 thread each end and an overall length of 80mm. Manufactured in a high tensile steel and bright zinc plated for corrosion protection. These studs screw into your wheel hubs, to convert them to studs instead of bolts, thus making it a lot easier to fit your wheels, especially if you're in a hurry, either on the track or in the rain at the side of the road. (Grayston SS24 shown in the image).
* PLEASE SEE OUR SIZE CHART VIA THE TAB ABOVE FOR DIMENSION DETAILS *
Please ensure you thoroughly clean your hubs and then fit these studs with a strong grade of Loctite thread locking compound.
Priced Each
Be the first to Write a Review for this item!
Grayston M12 x 1.25 to M12 x 1.25 Conversion Wheel Stud 100mm Long£1.70
Grayston M12 x 1.25 to M12 x 1.25 Conversion Wheel Stud 40mm Long£1.04
Grayston M12 x 1.25 to M12 x 1.50 Conversion Wheel Stud 80mm Long£1.15
Grayston M12 x 1.50 to M12 x 1.25 Conversion Wheel Stud 80mm Long£1.15
Motamec M8 Load Spreading Anodised WashersFrom: £1.98
Peugeot Open Wheel Nuts M12 x 1.25£2.97
Sparco Performance Tow Strap Orange£9.65
Grayston Bulge Dome Wheel Nut M12 x 1.25mm UNF 60 Degree Taper Seat Zinc Plated£1.67