Home > Motorsport > Rally Wheels > Conversion Studs
Part Number: SS24ASpline Diameter No SplineThread Size M12 x 1.25Stud Length 100mm
Grayston conversion wheel studs, here with an M12 x 1.25 thread each end and an overall length of 100mm. Manufactured in a high tensile steel and bright zinc plated for corrosion protection. These studs screw into your wheel hubs, to convert them to studs instead of bolts, thus making it a lot easier to fit your wheels, especially if you're in a hurry, either on the track or in the rain at the side of the road. (Grayston SS24 shown in the image).
* PLEASE SEE OUR SIZE CHART VIA THE TAB ABOVE FOR DIMENSION DETAILS *
Please ensure you throughly clean your hubs and then fit these studs with a strong grade of Loctite thread locking compound.
Be the first to Write a Review for this item!
AIT M12 x 1.25 to M12 x 1.25 Conversion Wheel Stud 100mm Long£6.20
AIT M12 x 1.50 to M12 x 1.25 Conversion Wheel Stud 100mm Long£6.65
Grayston M12 x 1.25 to M12 x 1.25 Conversion Wheel Stud 40mm Long£1.04
Grayston M12 x 1.50 to M12 x 1.25 Conversion Wheel Stud 100mm Long£1.76
Peugeot Open Wheel Nuts M12 x 1.25£2.97
Grayston Tuner Style Wheel Nut M12 x 1.25mm 60 Degree Taper Chrome Plated£1.60
R-Tech Roll Cage Padding£10.00
Terraphone Clubman Intercom Amplifier£69.00
Contact & Account
© 2023 Rallynuts Motorsport Limited