Home > Motorsport > Fuel System > Hose Fittings
Part Number: FGA100E
Sytec aluminium fuel line adaptor. A solid aluminium billet with two male barbed tails, available in 6mm, 8mm and 10mm sizes. The tails are removeable but have been glued into position. Simply cut an 8mm fuel pipe and insert this unit inline with a couple of jubilee clips (not included), and screw in your own fuel gauge or use the Sytec FPG001 gauge to view your fuel pressure during tuning and diagnostic work on the car. The alloy unit is tapped 1/8 NPT and comes supplied with a brass bung, to screw in with PTFE tape or hydraulic sealant after set up is completed. Sytec do not advise leaving a fuel gauge in place after setting up has been achieved.
High quality machined adaptor, in solid aluminium
Directly fits into your vehicles rubber fuel line
To be fitted with fuel clips and a gauge (not supplied)
Be the first to Write a Review for this item!
Sytec Fuel Gauge Adaptor 8mm£13.67
Sytec Fuel Gauge Adaptor No Unions£12.48
Sytec Fuel Gauge Adaptors 10mm Tails£15.96
Sytec Fuel Gauge Adaptors 6mm Tails£15.60
Contact & Account
© 2023 Rallynuts Motorsport Limited