Home > Motorsport > Fuel System > Hose Fittings
Part Number: FGA100D
Sytec aluminium fuel line adaptor. A solid aluminium billet supplied without any tails. Simply cut an 8mm fuel pipe and insert this unit inline with a couple of jubilee clips (not included), and screw in your own fuel gauge or use the Sytec FPG001 gauge to view your fuel pressure during tuning and diagnostic work on the car. The alloy unit is tapped 1/8 NPT and comes supplied with a brass bung, to screw in with PTFE tape or hydraulic sealant after set up is completed. Sytec do not advise leaving a fuel gauge in place after setting up has been achieved.
Be the first to Write a Review for this item!
Sytec Fuel Gauge Adaptor -06 JIC£18.72
Sytec Fuel Gauge Adaptor 8mm£13.67
Sytec Fuel Gauge Adaptors 10mm Tails£15.96
Sytec Fuel Gauge Adaptors 8mm Tails£15.82
Contact & Account
© 2023 Rallynuts Motorsport Limited