Home > Motorsport > Rally Wheels > Studs & Nuts
Part Number: SNV15Thread Size M12 x 1.25HEX Head 19mmSeat Type 60º Taper
PCD adjustment wheel nuts, often referred to as 'wobble' nuts, these high quality closed wheel nuts have an M12 x 1.25 pitch thread, with a tapered washer to suit most aftermarket and some OEM alloy wheels and they feature the main thread slightly offset within the nut. This actually allows wheels with not quite the right PCD to be used on vehicles that were not technically designed for. For example these nuts can be used to fit wheels with a PCD of 4 x 100 onto a hub that has a PCD of 4 x 98. Obviously there is a maximum offset that the nuts can accommodate, the manufacturers state this as 2mm.
Closed nut design to clear most length wheel studs
Steel construction with 60 degree tapered sleeve washer
Bright Zinc plated finish for corrosion resistance
Be the first to Write a Review for this item!
Grayston M12 x 1.25 60º Closed Aluminium Wheel Nuts£4.82
Grayston M12 x 1.25 60º Open Aluminium Wheel Nuts£4.82
Grayston PCD Adjusting Tapered Sleeve Wheel Nuts M12 x 1.50£1.95
Metric Open 60º Taper M12 x 1.25 (19mm Hex Head) Wheel Nuts Ford & Vauxhall£2.10
AIT M12 x 1.25 60º Taper Open Wheel Nuts£4.90
Contact & Account
© 2023 Rallynuts Motorsport Limited