Home > Motorsport > Rally Wheels > Conversion Studs
Part Number: SS29ASpline Diameter No SplineThread Size M14 x 1.5Stud Length 80mm
Grayston conversion wheel studs, here with an M14 x 1.50 thread each end and an overall length of 80mm. Manufactured in a high tensile steel and bright zinc plated for corrosion protection. These studs screw into your wheel hubs, to convert them to studs instead of bolts, thus making it a lot easier to fit your wheels, especially if you're in a hurry, either on the track or in the rain at the side of the road. (Grayston SS24 shown in the image).
* PLEASE SEE OUR SIZE CHART VIA THE TAB ABOVE FOR DIMENSION DETAILS *
Please ensure you thoroughly clean your hubs and then fit these studs with a strong grade of Loctite thread locking compound.
Be the first to Write a Review for this item!
AIT M14 x 1.25 to M14 x 1.50 Conversion Wheel Stud 80mm Long£6.96
Grayston M14 x 1.50 to M14 x 1.50 Conversion Wheel Stud 40mm Long£1.85
Grayston M14 x 1.50 to M14 x 1.50 Conversion Wheel Stud 50mm Long£1.95
Grayston M14 x 1.50 to M14 x 1.50 Conversion Wheel Stud 60mm Long£2.06
Grayston Bulge Dome Wheel Nut M14 x 1.5mm UNF 60 Degree Taper Seat Chrome Plated£1.67
Grayston M14 x 1.5mm 19mm Hex Radius Wheel Nut Zinc Plated£1.58
Metric Open 60º Taper M14 x 1.50 (19mm Hex Head) Wheel Nuts Ford & Vauxhall£2.10
Contact & Account
© 2023 Rallynuts Motorsport Limited