Home > Motorsport > Rally Wheels > Conversion Studs
Part Number: SS25Spline Diameter No SplineStud Length 60mm
Grayston conversion wheel studs, here with an M12 x 1.25 thread on the hub side, an M12 x 1.50 thread on the nut end and an overall length of 60mm. Manufactured in a high tensile steel and bright zinc plated for corrosion protection. These studs screw into your wheel hubs, to convert them to studs instead of bolts, thus making it a lot easier to fit your wheels, especially if you're in a hurry, either on the track or in the rain at the side of the road. (Grayston SS24 shown in the image).
* PLEASE SEE OUR SIZE CHART VIA THE TAB ABOVE FOR DIMENSION DETAILS *
Please ensure you throughly clean your hubs and then fit these studs with a strong grade of Loctite thread locking compound.
Be the first to Write a Review for this item!
Grayston M12 x 1.25 to M12 x 1.25 Conversion Wheel Stud 60mm Long£1.07
Grayston M12 x 1.25 to M12 x 1.50 Conversion Wheel Stud 80mm Long£1.15
Grayston M12 x 1.50 to M12 x 1.25 Conversion Wheel Stud 60mm Long£1.07
Grayston M12 x 1.50 to M12 x 1.50 Conversion Wheel Stud 60mm Long£1.07
Grayston PCD Adjusting Tapered Sleeve Wheel Nuts M12 x 1.50£1.95
Peugeot Open Wheel Nuts M12 x 1.50£2.97
Contact & Account
© 2023 Rallynuts Motorsport Limited