Home > Motorsport > Fuel System > Nitrile Hose
(Details shown apply to the default selection)
Part Number: PFB-008
Sytec black cotton braided nitrile rubber fuel hose. Suitable for use on vehicles with carburettors with typical working pressures of under 20psi although rated with a burst pressure of 362psi (25 Bar). Priced per metre and available in various popular sizes. Suitable for OE vehicle hose replacement, but also used on sports cars and used in motorsport. Maximum single length available 20 metres. Supplied in single lengths as requested, upto 20m.
** E10 COMPATIBLE **
Fuel Hose Lining: Acrylonitrile-Butadiene Rubber Inner/Cotton Yarn Outer
Compatible Fuels:Leaded, Lead Substitute, Unleaded, Diesel Water or air
Construction Design: Din 73379B
Temp Range: -30°C to +70°C
Recommendations: Fuel Injection Hose Up to 20 Psi (10bar)
Max Bust Pressure: 362 Psi (25 Bar)
Test Standards: SAE J30R6 / SAE J30R7
Safety Factor: 30%
Bend Radius: 25mm
Be the first to Write a Review for this item!
Sytec Alloy Fuel Hose FinishersFrom: £4.10
Sytec Stainless Low Pressure Braided Fuel Hose£8.95
Facet 480532 Red Top Works Competition Fuel Pump£119.58