Sytec Nitrile Rubber Fuel Injection Hose

Sytec competition Nitrile rubber fuel hose. Suitable for use on fuel injected with typical working pressures of around 145psi and rated with a burst pressure of 435psi (30 Bar). Priced per metre and available in the three most popular sizes used in motorsport. Maximum single length available 20 metres. Supplied in single lengths as requested, upto 20m.

** NOW E10 COMPATIBLE **

• Fuel Hose Lining: Acrylonitrile-Butadiene Rubber Inner/Cr Outer

• Compatible Fuels:Leaded, Lead Substitute, Unleaded, Diesel Water or air

• Construction Design: Din 73379

• Temp Range: -40°C to +150°C

• Recommendations: Fuel Injection Hose Up to 145 Psi (10bar)

• Max Bust Pressure:435 Psi (30 Bar)

• Test Standards: SAE J30R6 / SAE J30R7

• Safety Factor: 30%

• Bend Radius: 30mm